Importance of eating habits and sample size in the estimation of environmental mercury contamination using biological indicators

The importance of eating habits and the number of fish sampled in the estimation of mercury environmental contamination through biological indicators was studied. The species used were one with piscivorous habits (Anguilla anguilla) and another with omnivorous habits (Ciprinus carpio). From one original sample for each species, randomized samples were generated using the subroutine GGSRS from the mathematics library IMSL, and later the statistical significance of Pearson's correlation coefficient for the relationship between fish weight and mercury concentrations in muscle was obtained for each random sample. The results show that the use of omnivorous species such as Ciprinus carpio as a biological indicator of contamination enables us to carry out estimations with a greater degree of confidence than when piscivorous species such as Anguilla anguilla are used.     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.     

Seasonal fluctuations in sand temperature: effects on the incubation period and mortality of loggerhead sea turtle (<Emphasis Type="Italic">Caretta</Emphasis><Emphasis Type="Italic">caretta</Emphasis>) pre-emergent hatchlings in Minabe,Japan

Incubation period, hatching success, and emergence percentage in loggerhead (Caretta caretta) nests were quantified during the 1993 and 1995 nesting seasons and following incubation seasons in Minabe, Wakayama, Japan. Sand and nest temperatures were also monitored. Over the seasons, daily mean sand temperature at nest depth fluctuated between 18.0°C and 33.3°C, with a steep increase in the second week of July and a peak in late August. Temperatures inside the nest chambers were a few degrees above those of the surrounding sand at the end of incubation. The incubation period ranged from 46 to 82 days. A significant negative correlation was found between mean sand temperature and incubation period. The relationship conformed to the day-degree concept. There was no significant seasonal trend in hatching success, but many pre-emergent hatchlings were found dead in most of the clutches during the warmest part of the season. Emergence percentage was correlated with mean sand temperature calculated for 4 days before emergence, suggesting that mortality may be due to heat. This heat-related mortality is considered to be a common phenomenon at our study site, because the peak in emergences coincides with the peak in high temperatures. These temperature effects on hatchling mortality must be taken into account in estimates of hatchling sex ratios. Because sand temperatures already exceed the optimal thermal range for incubation, this population is vulnerable to even small temperature increases resulting from global warming.     

Funipuncture for fetocide in late termination of pregnancy

The most widely used method for fetocide in late termination of pregnancy for fetal abnormalities (TOPFA) consists of injecting of potassium chloride (KCl) into the fetal heart and is likely to be painful after 22 weeks of gestation. We studied ten consecutive women undergoing TOPFA between 22 and 38 weeks. This technique for fetocide consisted of a single umbilical vein puncture under ultrasound guidance with injections of sufentanil 5 µg followed by KCl 2 g. No electrocardiographic modifications could be observed and maternal plasma potassium levels did not show any significant variation throughout the procedure. Fetal umbilical phlebotomy for fetal analgesia followed by fetocide therefore appears to be a safe procedure for the mother and allows the fetus to die without pain when late termination of pregnancy (TOP) is indicated. Copyright © 2002 John Wiley & Sons, Ltd.     

Preimplantation genetic diagnosis of the fragile X syndrome by use of linked polymorphic markers

Fragile X syndrome is the most common cause of familial mental retardation. The most common mutation is expansion of a triplet (CGG)_n repeat in the 5′ untranslated region of the FMR1 gene on Xq27.3. The expansion is refractory to PCR due to preferential amplification of the smaller allele in heterozygous cells and the high GC content of the repeat and surrounding sequences. Direct detection of the normal parental alleles in preimplantation embryos has been used for preimplantation genetic diagnosis (PGD) of this disorder. However, this approach is only suitable for approximately 63% of couples due to the heterozygosity of the repeat in the normal population. As an alternative we investigated the use of polymorphic markers flanking the mutation to track the normal and premutation carrying maternal chromosomes in preimplantation embryos. Using a panel of 11 polymorphisms, six (CA)_n repeats and five single nucleotide polymorphisms, diagnosis was developed for 90% of referred couples. Multiplex amplification of informative markers was tested in 300 single buccal cells from interested couples with efficiency and allele drop out (ADO) rates ranging from 69% to 96% and 6% to 18%, respectively. Use of this approach is accurate and applicable to a larger number of patients at risk of transmitting fragile X to their offspring. Copyright © 2001 John Wiley & Sons, Ltd.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.